Professional Wire and Cable Supplier
Phone:86-13855514957 E-mail:greatsteelwirecable@yahoo.com
 |
| Place of Origin: | Anhui,China |
| Brand Name: | Litong Global |
| Certification: | ISO9001 and other 3rd party Inspection report |
| Model Number: | LT-1603242 |
| Minimum Order Quantity: | Negotiable |
|---|---|
| Price: | Negotiable |
| Packaging Details: | In Coil or on Drum |
| Delivery Time: | 10 days after confirmed order |
| Payment Terms: | TT |
| Supply Ability: | 400tons/day |
| Steel Grade: | Low&Middle And High Carbon Wire Rod | Wire Gauge: | 1.0-4.8mm |
|---|---|---|---|
| Type: | Galvanized | Alloy Or Not: | Non-alloy |
| Special Use: | Free Cutting Steel | Application: | Messenger Wire |
| Standard: | AISI|ASTM|BS|DIN|GB|JIS | ||
| High Light: | earth ground wire,galvanised steel rope |
||
.
Messenger Wire
Galvanized Wire is made to ASTM B498; ASTM A 475; BS 183 etc. The metallic zinc coatings applied by the galvanizing process are an effective way of combating corrosion in steel. Galvanized wire for cable application is available in a Class A coating; Class B coating and Class C coating.
Class A coatings are smoother, however less corrosion resistant than heavy galvanized coatings and are often used in normal wire working applications. Some typical end users include cages, bucket handles, coat hangers and baskets.
Class B and Class C coatings are used in conditions where atmospheric corrosion is severe. End users include crop support wires where chemicals are used, pool fencing or chain mesh in coastal areas.
Additional Info
Diameter Range: 1.57 -4.00 mm
Galvanised Wire Working Specifications
Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between standard, heavy galvanized and extra-high galvanized wire.
|
Nominal Diameter |
Minimum Coating Mass (g/m2) |
||
|
Standard Galv. |
Heavy Galv. |
Extra-highGalv. |
|
|
over 1.6 mm up to and incl. 1.90mm over 1.90mm up to and incl. 2.30mm over 2.30mm up to and incl. 2.70mm over 2.70mm up to and incl. 3.10mm over 3.10mm up to and incl. 3.50mm over 3.50mm up to and incl. 3.90mm |
210 220 230 240 260 270 |
420 440 460 480 520 540 |
630 660 690 720 780 810 |
Tensile Strength (Mpa)
The tensile strength is defined as the maximum load achieved in the tensile test, divided by the cross-sectional area of the wire test piece. Galvanized Wire is produced using soft, medium and hard grade wires. The following table specifies the tensile range according to the grade:
|
Nominal Wire Diameter |
Stress at 1% Elongation (Mpa) |
||
|
Class A |
Class B |
Class C |
|
|
over 1.6 mm up to and incl. 2.30mm over 2.30mm up to and incl. 3.05mm over 3.05mm up to and incl. 3.60mm over 3.60mm up to and incl. 4.80mm |
1310 1280 1240 1170 |
1240 1210 1170 1100 |
1170 1140 1100 1070 |
|
Nominal Wire Diameter |
Tensile Strength (Mpa) |
||
|
Class A |
Class B |
Class C |
|
|
over 1.6 mm up to and incl. 2.30mm over 2.30mm up to and incl. 3.05mm over 3.05mm up to and incl. 3.60mm over 3.60mm up to and incl. 4.80mm |
1450 1410 1410 1380 |
1380 1340 1340 1280 |
1310 1280 1280 1240 |
Please note that the sizes mentioned above are indicative only and do not specify the size range available from my products range.
|
Nominal Wire Diameter |
10in Elongation (%) |
||
|
Class A |
Class B |
Class C |
|
|
over 1.6 mm up to and incl. 2.30mm over 2.30mm up to and incl. 3.05mm over 3.05mm up to and incl. 3.60mm over 3.60mm up to and incl. 4.80mm |
3 3.5 4 4 |
3 3 3 4 |
3 3 3 4 |
Steel Chemistry
A combination of steel grades is used and heat treatment processes to manufacture soft, medium and hard tensile grades. The table below is indicative only of steel chemistries used.
|
Tensile Grade |
% Carbon |
% Phosphorus |
% Manganese |
% Silicon |
% Sulphur |
|
Normal |
0.5~0.85 |
0.035 |
0.5 ~1.10 |
0.10~0.35 |
0.045 |
Contact Person: nancy
